PAMA MODEL FT-180/A
PAMA MODEL FT-180/A
or
Call +39 0522 1536494
Specifications
| Manufacturer | PAMA |
| Model | FT-180/A CNC |
| Year | 2012 |
| Condition | Used |
| CNC control | SIEMENS 840-D |
| Length | 20.000 mm |
| Width | 11.000 mm |
| Machine height | 6.500 mm |
| Machine weight | 125.000 Kg |
| Axis x | 12.000 mm |
| Axis Y | 3.200 mm |
| Axis Z | 1.000 mm |
| Axis V | 1.200 mm |
| Z+V Axes | 2.200 mm |
| B Axis | 360° (Min. Angle 0,001°) |
| Table dimensions | 3.000 x 2.500 mm |
| Max load capacity | 45.000 Kg |
| Rotary table positions | 360.000 positions |
| Floor plate dimensions | 6.000 x 2.500 mm |
| Tool magazine capacity | 100 Positions |
| Tool type | DIN 69871-A50 |
| Pull stud type | DIN 69872-A50 |
| Max tool diameter with adjacent (full/empty) | Ø120 / Ø250 mm |
| Max tool length | 850 mm |
| Max tool weight | 50 Kg |
| X / Y Axes rapid feed | 6.000 mm/min |
| Z / V Rapid feed | 4.000 mm/min |
| Boring spindle diameter | Ø 180 mm |
| Milling spindle diameter | Ø 300 mm |
| RAM section dimensions | 480 x 440 mm |
| Boring spindle inside taper | ISO 60 |
| Spindle speed range | 2 ÷ 1.200 Rpm |
| Spindle steps | 3 steps |
| Spindle motor power | 80 kW |
| Accessories & Others | MACHINE COMPLETE OF ALL ITS ACCESSORIES AND ALL REFURBISHED FOLLOWING REFURBISHMENTS WAS DONE ON THE MACHINE: Spindle head with replacement of all new seals and bearings Gearbox fully refurbished with new bearings and lubrication system Refurbishment of all axes ball screws Replaced the joint between spindle motor and gearbox Y axis grinded to become as new Replacement of all the balancing wires, bearings and pulleys X axis new telescopic carters Installed the heat sensors in spindle head to monitorating the temperature on the screen Installed the system of CTS (Coolant Through Spindle) system of 40 bar All the hydraulic and pneumatic system refurbished with replacement of all pipes |